We now offer this Excellent Quality
Reproduction 30/31-PICT replacement carburetor. The testing has been fantastic,
and we are VERY proud to bring to you, the best Carburetor on the market
today....AT this incredible price.
Our Carburetor comes jetted with the
Jet - 120
Idle Jet - 50
There has been many
"Chinese Made" carburetors come into the market over the last few
years. We have tried and tested all of them. We are very confident to offer
this TOP QUALITY 30/31-PICT carburetor. All other of the no-name brands
from China have proven NOT to be well made. As with everything, you get what
you pay for.
How long should your 40 PLUS year old carburetor last? Your old original
carb. has simply worn out. Every time you push the throttle, the throttle shaft
wears against the carburetor body creating wear. After years of this, the wear
between the shaft and body allows air to slip through the gap entering the
engine. Your old carburetor has no way to adjust for this un-metered air,
throwing the idle fuel mixture so far out of adjustment that you will never be
able to get the car to idle properly once it has warmed up. The only answer?
You need to buy a 100% new carburetor. Even so-called rebuilt carbs do not
address this problem. We stock a complete selection of Brand new Carburetors.
This is not the Mexican Brosal carburetor produced with 20 year old
tooling. This a ALL NEW carburetor with ALL NEW tooling. If you hold a new
Mexican Brosal carb. next to this carburetor, you will instantly see the
different in quality and finish. We have tested these carburetors and they
perform perfectly in all stock engine applications. This carb. will give you
years of trouble free service and reliability.
For best results, we
recommend that you DO NOT use a "009" mechanical advance distributor
with the 30-PICT carburetor. The "009" Bosch mechanical advance
distributor does not advance until the engine RPM's have increased, but the
Stock (or near stock) Beetle/Ghia 1600cc engine with stock carburetor requires
advance the instant the throttle peddle is pressed. With a "009",
this results in a large flat spot (or hesitation) when you leave a stop sign.
This is not a problem with the carburetor and CAN NOT fixed by adjusting the
carburetor. For the very best results we recommend that you purchase a new
Vacuum advance distributor at the same time you order you new carb. Click here to see
part number VWC-043-905-205.
Special note about carburetors: (they are non returnable!) We sell only
100% brand-new carburetors manufactured by Cip1, Weber,Solex, Brosal,Empi and
Euromax. Every carburetor we sell has been pre-tested by each manufacture and
given 100% perfect condition stamp of approval. When considering the purchase
of a new carburetor- please be advised that we cannot return any carburetor for
any reason. Before installing a new carburetor- please insure that the fuel
lines and gas tank have been thoroughly cleaning and flushed of all dirt and
rust. Also - always replace all rubber fuel hoses and filters. It is your
responsibility to guarantee the cleanliness of your fuel system. This is the
only reason you will ever have a problem with a new carburetor.
If you need
technical assistance concerning
the tuning and adjustments of your new carburetor, Our tech support line is
open 8:00am-5:00pm Mon-Fri. to assist you,
Free: 1-800-313-3811 OR
1-604-881-7858. (Ask for Carburetor technical support).