Description
The needle and seat assemblies of most Performance carburetors can sufficiently control fuel pressure up to about 3-4 psi. If the fuel pump is putting out more than 4 psi, a regulator should be used to keep the fuel pressure within safe limits and avoid the possibility of flooding.
Fuel pressure Regulators are used to adjust for fuel pressure requirements of various carburetors. Too much fuel pressure for a given needle and seat assembly may cause flooding or driveability problems.
Features
3/8" NPT ports
.220" (7/32") restriction
Low Pressure (1-4 PSI)
Includes mounting bracket
Chrome Finish
Technical Information
Instructions for Part# 12-804
Please note: The bracket mounting holes are untapped on this Holley regulator. Use the supplied self-tapping screws.
Please note: The bracket mounting holes are untapped on this Holley regulator. Use the supplied self-tapping screws.
