These are the all new Cip1 ULTRA IDF/HPMX style 40MM or 44MM carburetor kits. They are hard to beat for performance, price and quality.
Our 40MM IDF style carburetors come jetted with the following.
Main Jet - 115
Air Jet - 200
Idle Jet - 60
Our 44MM IDF style carburetors come jetted with the following.
Main Jet - 135
Air Jet - 175
Idle Jet - 50
Our Dual 40MM carb. kits are perfect for any 1600CC style Beetle large displacement engine from 1700CC to 1915CC.
The 40MM kit will also work well on larger engines up to 2100CC when low end torque is your main goal and the engine is designed for this type of use.
The 44MM Dual carb. Kit is perfect for engines of 2000CC to 2332CC were maximum street reliability and performance.
The Cip1 Ultra Dual Carburetor Kit comes with EMPI Combo Linkage & Air Cleaners and Off-Set Manifolds. Kit Comes Complete with your choice of two Cip1 40MM or 44MM IDF / HPMX Premium style Carburetors. Complete kit includes EMPI Off-Set Manifolds, Linkage, Hi-Flow Gauze Air Filter Elements, Coil Relocation Bracket, Hardware, Gaskets, and fuel hose.
The Off-Set Manifolds Position the carburetors straight across the engine which helps eliminate body clearance issues. And, the Thick side walls allow for custom porting and port matching. The Hex Bar/Air Cleaner Linkage Combo Design looks Great and features Cast Air Cleaner Bottoms and Tops with built-in X-Bar Support for super Precise throttle control.
This kit fits nicely under the deck lid of your Beetle / Van or Ghia (Ghia owners will need to remove the hood springs).
SPECIAL NOTE: Our dual carb. kit will not fit when the stock fan shroud is used. The linkage cross bar may interfere with the factory fresh-air outlet horns. You can modify your horns (with a hammer) to make them fit. The best solution would one of our aftermarket style 36HP custom fan shrouds.
CLICK THIS LINK TO VIEW ALL AFTERMARKET FAN SHROUDS!
Re-Jetting the carb's will almost certainly be needed. Jetting changes are required based on your altitude, camshaft choice, compression ratio, engine usage and displacement.
CLICK HERE TO SEE ALL AVAILABLE MAIN, IDLE AND AIR JETS
SPECIAL NOTE: ALL PERFORMANCE CARBURETOR KITS ARE SOLD "AS-IS" AND ARE FOR OFF-ROAD USE ONLY!
Special note about all carburetors: (they are non returnable!) We sell only 100% brand-new carburetors manufactured by Cip1, Weber,Solex, Brosal,Empi and Euromax. Every carburetor we sell has been pre-tested by each manufacture and given 100% perfect condition stamp of approval. When considering the purchase of a new carburetor- please be advised that we cannot return any carburetor for any reason. Before installing a new carburetor- please insure that the fuel lines and gas tank have been thoroughly cleaning and flushed of all dirt and rust. Also - always replace all rubber fuel hoses and filters. It is your responsibility to guarantee the cleanliness of your fuel system. This is the only reason you will ever have a problem with a new carburetor.
If you need technical assistance concerning the tuning and adjustments of your new carburetor, Our tech support line is open 8:00am-5:00pm PST Mon-Fri. to assist you,
Call Toll Free: 1-800-313-3811 OR 1-604-881-7858. (Ask for Carburetor technical support).